A herringbone hardwood floor is one of those design choices that photographs beautifully and gets asked about constantly — but it also comes with a real cost premium over standard plank installation, which raises the fair question: is it actually worth it?
These two get lumped together constantly, but they're distinct patterns with a real visual difference.
Herringbone uses rectangular planks laid in a zigzag pattern where each row is offset, creating a broken "V" look. The individual planks are perpendicular to each other but don't meet at a point.
Chevron uses planks cut at an angle so they meet at a sharp point, creating a continuous, unbroken zigzag — a more dramatic, linear look than herringbone.
Both patterns take significantly more skill and time to install than straight-plank flooring, since every piece has to be cut and fitted precisely for the pattern to line up correctly.
Standard plank flooring installation is relatively efficient — long, straight runs with minimal cutting. Herringbone and chevron are the opposite: every single plank requires precise angle cuts, and the installer has to maintain the pattern's alignment across the entire room, including around doorways, closets, and transitions where the pattern has to resolve cleanly.
That's labor-intensive work, and it's reflected in the cost. It's not a markup for the sake of it — it genuinely takes longer to install correctly.
Herringbone and chevron tend to have the most visual impact in rooms where you can actually see the whole floor at once — entryways, kitchens, and dining rooms are the most common choices. In a large, open room, the pattern reads clearly and makes a strong first impression. In small, chopped-up spaces with lots of furniture covering the floor, the pattern's impact gets lost, which is worth factoring into where you spend the upgrade.
The pattern itself does a lot of the visual work, but wood species affects how much the grain competes with or complements it:
There's no wrong answer here — it comes down to whether you want the wood grain or the geometric pattern to be the dominant visual element.
Herringbone and chevron don't have to be all-or-nothing choices for a room. A common approach is combining a pattern field with a straight-plank border around the room's perimeter, or adding a custom inlay or contrasting border strip where the pattern meets a doorway or adjacent room. This can moderate the cost premium somewhat — since not every square foot of the room requires pattern-level precision cutting — while still delivering the visual impact where it matters most, typically the center of the room.
Day to day, a pattern floor doesn't require different care than standard plank flooring — the same cleaning products and habits apply. Where it does differ slightly is refinishing: because there are more seams and directional grain changes across a pattern floor, sanding and refinishing takes a more careful, methodical approach to get an even result across the whole pattern. It's not a reason to avoid a pattern floor, just worth knowing that refinishing quotes for herringbone or chevron floors typically run a bit higher than for the same square footage of straight-plank flooring.
For an entryway, kitchen, or any room meant to make a statement, most homeowners who go with a pattern floor say the upgrade was worth it — it's a genuinely different look from standard plank flooring, not just a variation on it. For a large-scale whole-home installation, the cost premium adds up faster, which is where a lot of people choose to use the pattern strategically in one or two rooms rather than throughout.
What's the actual difference between herringbone and chevron?
Herringbone planks are perpendicular to each other in a broken zigzag; chevron planks are angle-cut to meet at a point in a continuous zigzag.
Does herringbone cost more than standard plank flooring?
Yes — the precision cutting and fitting required takes significantly more installation time than straight-plank flooring.
Can herringbone be installed in a small room?
It can, but the visual impact is strongest in larger, more open spaces where the full pattern is visible.
Which wood species works best for a herringbone floor?
It depends on whether you want the pattern or the wood grain to stand out more — oak and maple are common choices for a cleaner pattern read.
Curious what a pattern floor would look like in your space? Infinity Flooring offers custom hardwood floors including herringbone and chevron patterns throughout Sioux City and Siouxland. See our work or get a free quote.
Contact Infinity Flooring today for a free consultation and estimate.
Based in Sioux City, Iowa, we provide premium flooring services throughout the Siouxland region — including Iowa, Nebraska, and South Dakota communities.
Don't see your city? Contact us — we likely serve your area.

Premium flooring solutions for residential and commercial spaces. Expert installation, exceptional quality.
4104 Morningside Ave
Sioux City, Iowa 51106
© 2026 Infinity Flooring. All rights reserved.